It contains particles of mineral powder that can absorb the heat from the room and later emit it for warming up cold surfaces.
It does not require pre-base and it can be applied over the old paint that does not peel off. The surfaces covered with mould should be washed with water solution of bleach (1dl of bleach dissolved in 1/2lit of water). It is applied (without dissolving) in two coats by using a brush or roller brush. In critical cases, the application of the third coat is recommended.
The first coat should ensure full coverage of the surface and minimum thickness of the coat. The second coat should be applied after 4 hours. After another 4 hours, the third coat should be applied and the total thickness of the coat should be around 1mm.
When the surface is completely dry, it can be painted over with standard dispersion paints. The consumption in 2 coats without dissolving is 0,7 lit/m². The consumption in 3 coats is 0,9 lit/m². When the product is dissolved with 10-15% water for easier application, it must be applied in three coats and the consumption is 0,7 lit/m².