Spray mould or mildew affected surfaces with the preparation from 10-15cm distance and leave it to act. After 15-20 min rinse with water as appropriate. Leave the surface to dry. After that, all treated surfaces can be used again.
Do not remove mildew or mould before applying the preparation in order to prevent the spreading of spores.
Recommended dose: as appropriate, depending on the surface subject to cleaning and disinfection.
Recommendation: 0.5 lit/4m2.
The whole surface that is treated should be covered in liquid. If the surface is much contaminated, the whole procedure can be repeated after 30 to 60 minutes.