In very humid rooms, the efficiency of moisture absorber device is visible only after ten days of use. The excess of ambient moisture is bound to salt crystals in the tablet. The reduction of moisture content in a room directly affects the incidence of condense (and/or mould), rotting of materials, wetting of walls …
The product does not consume energy (neither electricity, nor batteries) and does not emit any odour or vapour. When placing the tablet on the grid, the tablet should be squeezed out from the open bag and skin contact should be avoided.
Air with the increased content of humidity passes through lattice cover and chemically binds to salt in the tablet. The tablet is gradually melted (dissolved) and transformed in gelatinous liquid that is collected in the lower container and one tablet effect lasts 1-4 months depending on the content of moisture and air temperature in the room.
When the tablet is consumed and the container with collected liquid is filled up (maximum up to one litre), liquid content should be thrown away into sewage (other than to cesspit), the container and the grid should be washed out, dried and a new tablet should be placed.
When water vapour content in the room drops to optimal 50% – the moisture absorbed action stops, thus ensuring protection from excessive drying out of the air in the room. Absorber action cannot be seen immediately but after several days, and/or weeks. The first results are visible only after several months of continuous use.